Saturday, 12 January 2008

Network Enhancement for Delivery of Video services




Introduction:-


The delivery of voice and video services across access networks is much more demanding than the delivery of traditional high-speed Internet services. The sustained and peak data rates to users are significantly higher, pushing DSL capacity to the limits. In addition, the sensitivity to packet loss is greater, particularly in the case of video services.
This paper discusses research into enhancements that can be made to DSLAMs to ensure that the most important packets are delivered during times of network congestion, and looks at efficient ways of providing targeted forward error correction for sensitive services such as video. Increasing the number of simultaneous video streams or the quality of those streams over a channel with a limited capacity (like DSL) involves a high degree of video compression. Although the video compression factor can be increased, this also increases channel change latency, which can be more objectionable than the effects of additional compression. The article discusses a fast channel changing technique that does not sacrifice compression efficiency.
packets are delivered during times of network congestion, forward error correction for sensitive services such as video . Adavanced video coding is used to perform compression over a Group Of Pictures (GOP).










Network Enhancements…..



Digital Subscriber Line (DSL) networks have been successfully deployed primarily to provide a high-speed residential Internet service. Now a number of factors are leading network access providers to expand their service offerings to include the delivery of next generation voice and an assortment of video services.The common network architecture, as described in DSL Forum TR-59 [1], utilizes the Point-to-Point Protocol over Ethernet (PPPoE) between a routing gateway in the home and the network provider's or Internet service provider's Broadband Remote Access Server (BRAS). The access network is unaware of what type of traffic is being sent through the PPPoE tunnel, and therefore treats it all as best-effort traffic. It is up to the BRAS and routing gateway to correctly schedule traffic to avoid congestion and any consequent uncontrolled packet loss. New IP-aware network architectures, such as those described in [2,3,4,5], provide traffic class and IP awareness using the Ethernet 802.1p bits, Ethertype, Code Points (DSCP), or other indications to differentiate between traffic classes. It is then possible to treat some classes of traffic differently from other classes.







In access networks delivering voice, video and data services, video streams generally represent the bulk of the traffic. All video packets are treated equally, regardless of their importance to the decoded video. However, some video packets may be much more important than others. If a video-aware DSL Access Multiplexer (DSLAM) could inspect these packets, determine their relative importance, and treat the traffic accordingly, then the overall delivery of video and other traffic could be improved.
It is expected that DSL will benefit from ever-increasing video compression factors. However, this has the unwanted side effect of lengthening the time taken to change channels. This article presents a method for reducing the channel changing time, thereby enabling a higher degree of video compression.





Video is composed of a sequence of pictures or frames. In the case of entertainment quality video, the popular MPEG-2 and emerging H.264 (also known as MPEG-4 Advanced Video Coding or AVC) [6] techniques perform compression over a Group Of Pictures (GOP). A GOP is a sequence of three types of encoded frames: an Intra-coded (I) frame, Predictive (P) frames, and Bi-predictive (B) frames. A representative GOP structure is shown in Figure 1.
The GOP begins with an I-frame, which is encoded independently of any other frame. The I-frame is used to predict what other frames will be in the GOP. P-frames are encoded with a past I- or P-frame and may be used as a reference to future P- or B-frames. B-frames are encoded with reference to a weighted average of two frames (I or P for MPEG-2; I, P or B for H.264).
























Both the encoder and decoder predict what the frame currently being compressed will look like, based on past reconstructed frames (the encoder includes a decoder so that both the encoder and the decoder make an identical prediction). The encoder encodes the difference between the actual frame and the predicted frame. The prediction error is encoded and transmitted to the decoder and used with the decoder's prediction to reconstruct the frame.
This background shows that not all packets are equally critical to the quality of the reconstructed video. For instance, a defect in a reconstructed I-frame caused by a transmission error or packet loss will propagate to all other frames in the GOP and may be quite objectionable. A defect in a reconstructed P-frame affects fewer frames and is often noticeable, whereas a defect in a reconstructed B-frame generally affects only itself and may often be effectively concealed.























H.264 is a significant improvement over MPEG-2 in several ways, including:













Compression performance: H.264 is capable of 50% or greater bitrate savings for a similar degree of encoder optimization; this has been achieved by many cumulative improvements.
Improved network friendliness to ease packetization, information priority control, and application to video streaming services.
Enhanced error resilience and packet loss resilience tools.
H.264 specifies a layered structure with a Video Coding Layer (VCL) efficiently representing the content of the video data, and a Network Abstraction Layer (NAL) to format the data and provide header information in a way that enables it to be conveyed over transport layers, such as MPEG-2 transport streams or Real-Time Transport Protocol / User Datagram Protocol / IP (RTP/UDP/IP) [7]. NAL unit payloads of various types are encapsulated into NAL units; the NAL unit type and relative transport priority are indicated by the two NAL Reference ID (NRI) code bits in the single byte NAL unit header (see Figure 2). The relative transport priority can be used by a video-aware transport network to ensure that NAL units containing more critical payloads receive a higher quality of service than less-critical payloads.























































































Drop-in Video Solution and access network:-





Video over DSL makes extensive use of IP multicast functionality for efficient delivery of broadcast and pay-per-view video content. This requires a robust implementation of IP multicast protocols such as PIM-SM and IGMP. Where multicast replication is performed—nearer the core or the access edge—this is a key driver of cost and performance. Ideally replication should occur as close to the subscriber as possible, in the remote DSLAM. Unfortunately, most currently deployed DSLAMs lack the inherent multicast functionality or IGMP awareness to allow replication.
The IP Video Routing Solution provides carriers the flexibility and enhanced support they need to address all of their multicast needs. For example, until subscriber numbers increase, multicast replication can be provided via the Video Router in the form of multicast over per-subscriber ATM PVCs. This allows the service provider to provide video services now with their existing infrastructure, while gradually introducing nextgeneration DSLAMs to gain efficiency as subscriber volumes grow. In addition, the Laurel IP Video Routing Solution supports high availability multicasting of video services by maintaining IP multicast group membership and forwarding, even in the event of a control processor failure. With its ST200 router, the solution delivers scalable multicast replication, supporting thousands of IP multicast-based video channels.
A single channel can be replicated and delivered to over 64,000 logical interfaces (ATM PVCs or VLANs).
With the powerful broadband subscriber features required for servicing residential video customers, it is engineered to drop into existing ATM-based service provider networks with no network redesign or DSLAM equipment displacement.









Video services overview:-










Dozens of mobile operators have piloted and launched mobile video services, which are evolving with the addition of high-quality video streaming and realtime
person-to-person communication, opening up even more opportunities. For example, ARC Group estimates that the number of Worldwide Mobile Video Users may grow to 24 million in 2004 and more than ten times larger, to 247 Million, in 2008
(Mobile Video – Worldwide Market Analysis & StrategicOutlook 2003–2008, ARC Group).










Today, some 60 operators have launched mobile video services according to press releases
and other public sources.













Content-to-person video services





Content-to-person “video messaging” refers to a case where the video clip originates from a commercial service on a pull or subscription push basis.
“Video download”, as the name implies, refers to the delivery of video clips to a
mobile device, usually through discovery such as mobile browsing and then followed by a TCP/IP session where the clip is sent to the device to be viewed or stored. Similarly, digital rights management and available device memory apply regarding local storage on the device. “ Video streaming” indicates immediate consumption of on-demand or live video content on a mobile device – the content is not stored on the device. This method allows the consumption of large video fi les without any dependence on device memory, since the fi le is not physically stored on the client. As a result, digital rights management is not an essential factor for video



Person-to-person video services:



Person-to-person video communication in mobile devices started with “video messaging” or video MMS, a natural evolution from still image-based multimedia messaging. Video recording, now available on a wide range of camera phones, allows the user to record a video clip and send it to another mobile device within a multimedia message. It can be opened and played back for viewing or saved on to the device memory if desired and allowed.
“Video sharing” allows mobile users to share one-way video in real time, while they are already active in a voice session. Because the user can decide to add video after making a usual voice call,this is a great way to gain additional revenue from voice calls and differentiate within 3G services.





Multi-service Access Networks:




DSLAMs have traditionally been deployed in central offices, since the ability to provide high-speed Internet service to a large number of users from a central location is attractive from the viewpoint of equipment and operating costs. However, the distance from central office to user is often too long to support the desired suite of video and other services.
Consequently, to achieve the high data rates required, it is necessary to deploy DSLAMs deep into the network to considerably shorten the distance to the user. There are a limited number of points between the central office and the user where a carrier can conveniently gain access to a twisted wire pair in order to couple DSL to it.




















These points are a consequence of the outside plant engineering rules established long before DSL networks were envisioned. In the United States, carriers define Carrier Serving Areas (CSA) based on loop resistance, which is related to wire gauge and loop length. These CSAs are divided into Distribution Areas (DA), primarily based on cable route and management considerations. At the CSA and DA boundaries, known as the Feeder Distribution Interface (FDI) or Service Area Interface (SAI), a cross-connect cabinet is generally installed for cable rearrangement and tapering (i.e. to accommodate the increasing number of twisted pairs per home closer to users' homes). DSL can be coupled to the twisted wire pairs at these locations. Figure 4 shows a multi-service access network with DSLAMs deployed at the FDI locations.
Assuming a well engineered core and aggregation network, the volume of traffic that can ultimately be delivered to a user is constrained by the DSL line rate. Deploying DSLAMs as deep as is practical significantly addresses this constraint. Improving the traffic management at this point of congestion can further improve the delivery of triple-play services.






The ISP Play in Video:-






As the PTTs ramp up to launch video services as part of their core business, they're also moving on a faster track toward delivery of video, including VOD and even regular television programming, through their ISP units. For example, Telenor in January entered into a partnership with TV 2 Interaktv AS to support direct video streaming, storing, payment solutions and distribution of TV 2's web-TV to broadband subscribers. This service includes news, sports and popular entertainment programming which will be delivered to PCs at "a quality that will be close to DVD," according to Gunnar Stavrum, managing director of TV 2.
Where this trend becomes especially worrisome to cable interests is in instances involving porting of the Web-based video to the TV set. In most cases, Bluewin being the major known exception, the ISPs are creating a value-added TV service that challenges cable on the VOD and interactive services front without delivering regular broadcast programming.
Germany's largest ISP with 3.2 million customers and 10 million household passings via ADSL, launched its Vision service. The heart of the service is a sophisticated new media gateway product from a joint venture between Siemens and Fujitsu that, along with converting signals for display on TV sets, serves as digital video recorder and media center for controlling access to content to home devices. The entire platform runs on the Windows Media 9 software suite, including the DRM and video compression. "We firmly believe that features such as digital TV, a digital, remotely programmable video recorder, time-shifted TV viewing, video on demand and interactive television formats will appeal to a large number of customers.






WHAT IS DSL?






Simply, DSL is a pair of copper wires running between the telephone exchange and end-user
providing high-speed connectivity to the Internet and other networks. At each end, a
high-speed modem allows information to be sent at up to 8Mbps compared to the standard
PST’s 4Kbps. This means quicker access for both residential and business users for a
whole host of data and voice services.This is currently only available over slower or mor
expensive communication services.
DSL is often mistakenly referred to as a service when in fact it is the transport mechanism providing the high-speed connection to the Internet over which a plethora
of services may be delivered.
The variations of DSL are:
ADSL
Asynchronous Digital Subscriber Line provides speeds of up to 8Mbps downstream
(to the user) and 1Mbps upstream (performance will vary depending on line length and loop and
line conditions). ADSL offers high-speed digital access and analogue voice service over a
local loop.
The original market driver was distribution of video-on-demand, but now ADSLbased
network services offer fast speed to more sophisticated Internet users who require
the downloading of large files and other resources from the web.

SDSL
Symmetric Digital Subscriber Line (also known as ‘single line’) service provides equal
bandwidth in both directions. SDSL’s ability to support high-speed transfers of information
in both directions makes it ideal for business applications, including Internet access,
telecommuting or connecting remote offices of larger corporations.

IDSL
ISDN Digital Subscriber Line service is designed to accommodate users who have
previously invested in ISDN. This businessoriented service provides ISDN signalling
at 144Kbps over a DSL circuit and works with existing ISDN equipment at the local
carrier’s central office.

HDSL2
High-Speed Digital Subscriber Line service runs at approximately 6 Mbps in both directions, providing a similar service to leased lines.

VDSL
Very High-Speed Digital Subscriber Line is the next generation of DSL that can stream video and data over the existing telephone network infrastructures at speeds in the range 6.5 Mbps to 52 Mbps.
Video 6.3 Video enhanced DSL
End to ………end to end solution for delivery of multiple video channels over DSL ……
WHAT IS VIDEO ENHANCED DSL?
Video enhanced DSL is a research project (under the US NIST ATP framework) that attacks two major technical barriers; advanced video compression and multi-channel video stream multiplexing in the access network environment. . Figure 1 shows the role each partner plays within this project. The objective is to provide a solution for multiple simultaneous Standard Definition (SD) and High Definition (HD) TV channels over limited bandwidth DSL links. This will provide commercial quality video services for subscribers of IPTV by supporting multiple TV channels.
The Video Enhanced DSL (VeDSL) project illustrates the following benefits: 􀂄 􀂄 􀂄 􀂄
Triple-play solution at lower bandwidths
Expanded service coverage
Lower delivery cost











OPTIMIZED TRIPLE PLAY SOLUTION….










An end-to-end triple play solution integrating CO, access, transport and CPE into a complete, managed services platform. This end-to-end solution alleviates system incompatibilities and smoothes network upgrades. With advanced features including packet voice, IP subscriber termination, IGMPv2 and IP multicasting, VPN and VLAN support, the MALC combines next-generation packet performance with comprehensive circuit-switched capabilities. The result: carriers have the ultimate flexibility in deployment, network migration, and in serving their subscribers.
A robust line of CPE including the Residential Gateway (RG). The RG provides the whole home functions delivering packet voice, data, and video services to the subscriber. Available in an outdoor Network Interface Device (NID) or compact indoor form factor, the RG combinesthe functions of a DSL modem, up to 4 video set top boxes, and an Integrated Access Device (IAD). The ZRG can function as the demarcation point between the in-home network and outside plant, providing the carrier with a test access point for the drop.
The RG delivers 2 telephone lines, with one line providing life line service in the event of a power failure. Internet access is provided via a 10/100 Base T Ethernet port, which can be connected to an in-home Ethernet or wireless LAN.







Video on Demand (VOD) :-








Gelman et al. present an store-and-forward architecture that can provide VoD and claim their approach to be real-time capable The bandwidth is not guaranteed, which may decrease the QoS in case of network congestion. We use intelligent content replication that improves the reliability and the scalability of the VoD system.
Content replication occurs on a priori knowledge about user behavior and content categories In our approach, we choose a method that can be made an appraisal for future values it is an most Simplest scheme for delivery of enhanced video packets. One server channel to serve each video on request.



DSL Performance:-



The data rate that can be supported over an access line decreases with increasing loop length. It is also a function of the wire gauge, the condition of the cables and splices, crosstalk and noise levels, and other factors.
Figure 3 shows the simulated performance of Asymmetric Digital Subscriber Line 2+ (ADSL2+) and Very high speed Digital Subscriber Line 2 (VDSL2) over 26 AWG (0.4 mm) wire with a fairly significant level of self-crosstalk and noise. The performance on outside plant is often better, but can also be worse than this simulated performance.




Using H.264 video compression, three channels of standard definition TV, one channel of high definition TV, a few channels of Voice over IP (VoIP), with some capacity left over for high-speed Internet access requires approximately 18 to 24 Mbit/s to a user. As can be seen from Figure 3, 20 Mbit/s can be provided over about 3000 ft (1 km) using VDSL2 or about 4500 ft (1.5 km) using two-pair bonded ADSL2+ (10 Mbit/s per pair). Clearly this distance is too short to provide the required suite of video services to most users served directly from the central office.



Crosstalk :-


An unwanted energy transfer between a disturbing pair in a telephone cable, or a disturbing channel of a transmission system, and disturbed pair or channel. It is called either far-end crosstalk (FEXT) or near-end crosstalk (NEXT) according to the location of the measurement point with respect to that of the disturbing source.


Video-aware Traffic Management:-


compares the consequences of fairly discarding video packets with selectively discarding video packets for H.264 compressed video sequences. The images are of frames captured from decoded video after an equal number of bits have been discarded. The image on the left is of a captured image following the discarding of B-frame packets, while the captured image on the right is after discarding P-frame packets. The consequence of intelligent packet discarding is negligible while the consequence of random packet dropping is quite objectionable until the beginning of the next GOP.
Generally, a video stream is encoded with a constant bit rate, or with a variable bit rate constrained by peak and average rates. Encoders can also be implemented with additional rate constraints and with compression standards. For example, an encoder could limit the peak rate of a base layer (the I- and P-frames) and variability of an enhancement layer (the B-frames) .




Connection admission control or policy driven methods can ensure that there is sufficient capacity on each DSL line to carry the video base layer of the selected video streams in addition to voice and other high priority traffic. The video enhancement layer of the selected video streams and lower priority traffic could be scheduled with a lower priority, allowing a degree of overbooking without compromising the most important traffic.
In IP DSLAMs, such as the Alcatel 7302 and 7330, traffic can be treated differently based on the 802.1.p bits. The .p bits may be trusted or be determined by inspecting fields such as the Ethertype or DSCP field in the arriving packets. In a video-aware DSLAM, this method can be extended to include inspecting the NRI bits in the NAL unit header of the arriving video packets. It is prudent to use the NRI bits rather than trusting the .p bits as .p bits set by an encoder may be altered as packets traverse the network.



Fast Channel Changing:-


A significant factor in the user's experience is the channel changing time. A viewer expects a new channel to appear very rapidly after the channel has been selected. The acceptable range is about 500 ms or less.


Stationary noise :-


Noise (e.g. on the DSL line) for which the statistical properties (average noise energy, frequency spectrum) do not change over time. Although the statistical properties do not change, the noise signal itself is highly random.


Trellis coding:-


Trellis coding is convolutional coding combined with a bit-to-symbol mapping that achieves coding gain with no bandwidth expansion.


It has been observed that extending the GOP period from 0.5 s to 2 s improves the coding efficiency by about 15 to 20%. However, as decoding can only start after an I-frame has been received by a decoder, improving the coding efficiency by extending the GOP period would unacceptably degrade the channel changing performance.
A solution currently being investigated [8] is to associate a low bitrate (reduced temporal and spatial resolution) stream with each channel. This stream will be encoded with I-frames that occur frequently (2 to 4 times a second) so that the stream can be quickly decoded and displayed. The capacity required for the reduced resolution stream would be less than the savings achieved from the longer GOP period. The fast channel change approach is illustrated in Figure 6. When a set-top box requests a channel change, the DSLAM delivers both the full resolution stream and the associated reduced resolution stream, which could be quickly decoded and displayed.






Soon after the full resolution I-frame is received, the set-top box will display the full resolution stream and signal the AM to DSL stop sending the reduced resolution stream.

Impulse noise:-

Noise consisting of random occurrences of energy spikes with random amplitudes and spectral content.

CHANNEL CHANGE CONSIDERATIONS :-

DSL will benefit from ever increasing video compression, but highly compressed video can have an unintended side effect of lengthening the channel change time due to less frequent I-frames within the video stream that are needed to start the video decoding process. The DSLAM, where channel switching is performed, will respond quickly to end user channel change requests, but depending on the I-Frame arrival time the channel change experience may not be acceptable to the viewer. One approach to address this issue is to have a low bit rate (lower resolution) channel change stream with frequent I-frames encoded for each channel as shown in Figure . The decoder would temporarily decode the channel change stream and then would decode the normal channel upon the arrival of an I-Frame. This approach can ensure an acceptable channel change experience.

Error Correction & Error Protection….

Forward Error Correction:-

A DSL line is prone to noise from stationary noise sources, such as crosstalk from signals on other twisted wire pairs in the same cable, and non-stationary noise sources, such as telephony on-hook/off-hook transients, and from many external noise sources. Noise causes transmission errors and consequently packet loss. To protect against transmission errors, DSL uses trellis coding and Reed-Solomon Forward Error Correction (FEC). The latter can be achieved with or without interleaving, a technique that disperses bursts of errors so that they can be corrected more effectively. The non-interleaved (or fast) mode is effective against stationary noise sources; it is considered sufficient for services that can tolerate occasional packet loss, such as high-speed Internet access. However, more error sensitive services, such as video, require further error protection. Additional error protection can be provided in various ways, which can be used alone or in combination. First, the noise margin used by the DSL modem when training can be increased. This is effective against stationary noise, but is of limited use against impulse noise. Increasing the noise margin reduces the DSL line rate at a given distance.
Second, the interleaved mode can be used to combat bursts of errors. Increasing the interleaving depth increases burst error protection, but at the cost of increasing transport latency. Increased latency can decrease the throughput of services that are sensitive to round-trip delay, such as Transmission Control Protocol (TCP) transfers.
A third technique is to use application layer error protection, which enables applications to provide additional error protection as and when necessary. Some application packets could be given a greater degree of protection than others. As an end-to-end error protection scheme, this has the additional benefit of correcting errors in other parts ,such as the core and home networks.

A simple FEC scheme is proposed in RFC2733 [9]; an extension is utilized to carry video traffic in the Pro-MPEG Forum Code of Practice 3 (CoP3) [10]. RFC2733 calculates an FEC packet for a set of fixed length data packets.

Unequal Error Protection:-

Since the loss of some video packets results in considerably more visible defects than others, and when the importance of a packet can be easily determined, error protection can be applied unequally so that the most important video packets receive the most protection. For example, packets containing B-frames may not warrant additional error correction beyond that already provided by the DSL link layer, whereas packets containing I- and P-frames could be protected in accordance with RFC2733. This results in either less overhead for a given level of protection, or greater protection for a given overhead.

VIDEO COMPRESSION CHALLENGES :-

The current state-of-the-art video compression standard is H.264/MPEG-4 AVC. Video encoders and set-top boxes (decoders) are coming on the market now and are expected to improve the compression by a factor of 2 compared to MPEG-2. Additional enhancements to H.264 AVC are being explored in this project that targets the compression performance of .07 bits per pixel that represents about 3X improvement to MPEG-2.

Introduction to MPEG-4:-
MPEG-4 exploit the intrinsic redundancy between consecutive video pictures to reduce the workload of processors.
MPEG-4 allows to decompose video scenes into single natural or synthetic audio-visual objects

called Elementary Streams.

The major benefits of MPEG-4 are fast encoding mechanisms, reusability of video objects across

different video scenes.

The core between the application and the transport layer is provided by the MPEG-4 Delivery

Multimedia Integration Framework (DMIF) that abstracts video transmission from the underlying

Media We also exploited the improved scalability features of MPEG-4 and presented an

architecture and protocol that allows to transmit encoded video.

10. ADVANTAGES:-

VIDEO ENHANCED DSL MARKET ADVANTAGE -

Carriers within the United States that offer video services require the capability to offer multi-channel services to their subscribers. They are competing with MSOs and satellite service providers that offer this type of service today. In the US, most families have in their homes multiple TV sets and recording devices, each actively viewing or recording different TV channels. Most existing DSL service drops within the US today deliver 1.5Mbps. With the demonstrated technology, two SD channels could be delivered to those subscribers. As carriers build out their high performance broadband access networks, utilizing the demonstrated technology would allow carriers in the US and worldwide to offer additional channels with both SD and HD content of high quality at a lower aggregate bandwidth. This would allow carriers to realize lower initial CAPEX, increased market coverage and thus an improved return on their investments.
KEY FEATURES
• Uses the standard twisted copper pair.
• Provides high-speed, data transfer rates
• Variable bit rate service, ideal for dealing with bursty traffic
• Designed to deliver content/video downstream to customers
• The upstream bandwidth would be typically used for email and other lower speed data services.
BENEFITS
• Extends the always-on characteristic of DSL by letting users turn services on and off instantly
• Users can simultaneously access several services – such as private and workInternet services
– without having to establish and tear down sessionseach time
• Users can select different levels of service with various levels of security or Quality
of Service

ADVANTAGES OF INTELLIGENT (VIDEO AWARE) TRAFFIC MANAGEMENT :-

Video aware traffic management allows two or more video channels to be intelligently multiplexed onto DSL facilities at lower bandwidths and without degrading video quality. Intelligent traffic management protects the most important video information within a video stream at the point of stream multiplexing. During congestion periods, the traffic manager selectively discards information that will least affect picture quality. Discarded information concealment in the video decoder can effectively maintain good picture quality. The consequences of random video packet discarding during congestion periods can produce lingering artifacts that produce objectionable picture quality. Figure 3 contains an example illustrating the benefits obtained by the application of intelligent traffic management.

Conclusion:-

The delivery of video services will have a major impact on the access network architecture, equipment design and equipment placement because peak and sustained traffic levels are dramatically higher than required for high-speed Internet access. DSL link layer FEC improvements all contribute to making an access network capable of supporting voice, video and data services. Improved video compression and reduced sensitivity to packet loss enable more channels of higher quality to be delivered over longer distances.
The H.264 video compression standard provides a mechanism for identifying the importance of a video packet. the most efficient way to provide sufficient error correction for the most sensitive traffic.
Techniques are being investigated that improve the channel changing performance while allowing greater video compression.
Sensitivity to packet loss is prevented by unequal error protection.
Overall delivery of video services is much improved.

No comments: